imagistics ipc1-im8130 Operator's Manual page 73

Postscript Font Properties
The Fonts tab lets you set various font options that can make printing
your documents faster and more efficient. It also provides access to the
AGFA Font Manager application.
Send to Printer as: identifies the type of font to be sent to the printer.
Threshold Units: identifies the units in which the threshold size is
given.
Threshold: is the size (in threshold units) at and above which fonts
are sent to the printer per the rule set by
Substitution Table
For System Font: lists system fonts for use in the substitution table.
Use Device Font: lists device fonts available to match a system font
in the substitution table.
Default Substitution: sets the default system font to device font
correspondence.
Use Printer Fonts for all True Type Fonts: is enabled if printer
fonts are to be used instead of True Type fonts when the threshold
size is met or exceeded. This option is disabled if
enabled.
Use Substitution Table: is enabled if the substitution table is to be
used to send fonts to the printer when the threshold size is met or
ipc1-im8130 Operator's Guide
PostScript Font Properties Tab
.
or
Use Printer Fonts...
Use Substitution Table
Use
is
57