imagistics ipc1-im8130 Operator's Manual page 71

Options Section
This section identifies the optional features connected to the copier.
External Large Capacity Feeder: holds several reams of paper.
Inserter: inserts paper into documents.
Pedestal: holds paper cassettes.
Finisher: staples or saddle-stitches documents.
Hole Punch Unit: punches holes in documents.
Cassette Information
This section identifies the enabled cassettes and the size and type of
paper they contain. If the configuration cannot be dynamically retrieved,
the default value is shown. Disabled and unavailable cassette names are
grayed out.
Upper Drawer: is the standard upper drawer of the copier.
Lower Drawer: is the standard lower drawer of the copier.
1st Pedestal: is the first cassette of the optional pedestal.
2nd Pedestal: is the second cassette of the optional pedestal.
Tandem LCF: is the tandem large capacity feeder of the optional
pedestal.
External LCF: is the optional external large capacity feeder.
Use Bidirectional Communication: enables the driver to
communicate with the controller provided that the protocol installed
is either TCP/IP or IPX/SPX. The driver sends and receives messages,
including the copier configuration, department code validation, etc.,
to and from the controller.
Select this option to have the printer driver automatically retrieve the
correct settings from the printer. If department code enforcement is
enabled, bidirectional communication verifies the department code.
Dynamic Update: controls when the driver communicates with the
controller to display configuration information.
If
current copier configuration information. This may take a few
seconds to complete.
If
Instead, the software updates the configuration information each time
you open the
ipc1-im8130 Operator's Guide
is disabled (not checked), clicking
Dynamic Update
is enabled (checked),
Dynamic Update
Options
Update Now
tab.
retrieves
Update Now
is not available.
55