imagistics ipc1-im8130 Operator's Manual page 106

Because the feed orientation of the paper affects the stapling and hole
punch positions, you select the paper size and the controller
automatically selects the source cassette with the correct feed
orientation. Notice that the source changes to
Two occasions require you to define the paper source:
The bypass feeder may be required if the size of the paper in the
cassette you select is not the same as the document size.
90
Paper Size
13inch LG
8.5SQ
A6
8K
16K
Letter Tab
A4 Tab
Postcard
LT on LD
A4 on A3
B5 on B4
The last three paper sizes LT on LD, A4 on A3, and B5 on B4 are
for booklets only. Selecting a booklet paper size changes the
Layout page to book format and disables all secondary paper
options with the exception of
The Postcard paper size is supported through the bypass feeder.
There is no A6 paper cassette.
Selecting on the Setup page disables A6 paper through the
Duplex
bypass feeder.
Short-edge feed works for Letter, A4, B5, and 16K. On the copier
these paper sizes are identified as Letter-R, A4-R, B5-R, and 16K-
R, respectively.
The job requires the bypass feeder
A cassette contains one of the paper sizes for a booklet, and you
have selected a booklet paper type.
Paper Sizes
Measurements
Legal 13 (8½ x 13 in)
Letter Square (8½ x 8½ in)
105 x 148 mm
270 x 390 mm
195 x 270 mm
8½ x 11 in
210 x 297 mm
100 x 148 mm
Letter booklet on Ledger
A4 booklet on A3
B5 booklet on B4
Front Cover
(in blank and duplex).
.
Auto Select
ipc1-im8130 Operator's Guide