imagistics ipc1-im8130 Operator's Manual page 114

4 Enter the five-digit Private DIN in the field. You can enter less than
five digits, but the controller expects the preceding digit, which in this
case would be zero (0).
5 Click
6 Release the job from the control panel. See
page 130.
Printing Confidential Documents in Unix
You cannot use the private print feature in combination with the proof
print in Unix applications.
1 To print a private document, enter the following command: lp -0
private=<din> <filename> where din is a five-digit (numeric)
value.
The document is spooled to the controller for printing.
2 From the control panel of the Imagistics digital copier, release the job
for printing. See
Printing a Proof Copy from a Windows Workstation
The proof print feature prevents costly mistakes by allowing you to check
the printed output on a sample copy before printing an entire multi-copy
job. Then, depending on whether or not the proof meets your
expectations, you can cancel the job or print the remaining copies.
Using the proof print feature involves two steps:
Print the job to the copier in proof print mode. This step is platform-
specific.
Assuming the proof is satisfactory, release the job for printing from
the control panel of the copier.
Note: You cannot use the proof print feature in combination with the
private print feature.
1 On the Setup properties tab, select
down list.
2 Enter the total
You can alter this number from the digital copier control panel after
you review the proof copy.
98
. The document is spooled to the controller for printing.
Print
Releasing Print Jobs
Number of Copies
Releasing Print Jobs
on page 130.
from the
Proof Print
you want to print.
ipc1-im8130 Operator's Guide
on
drop-
Job Type