imagistics ipc1-im8130 Operator's Manual page 145

1 In the print properties window, click the
2 Click
3 Check
and use the application engine instead.
4 Click
5 Click
Using Adobe Document Structuring Convention (ADSC)
ADSC prints each page as a separate job. This prevents intervening jobs
from causing errors in the final printout.
1 In the print properties window, click the
2 Click
3 Check
print job as a self-contained job.
4 Click
5 Click
Choosing a PostScript Output Protocol
1 In the print properties window, click the
2 Click
3 Select the output protocol you want.
4 Click
5 Click
Compressing Bitmaps
Bitmapped images are often very large files, especially in uncompressed
form. Compressing bitmapped images can greatly reduce the overhead
and network bandwidth required to send them over the network.
ipc1-im8130 Operator's Guide
PostScript Settings
Use PostScript Pass-through
to return to the properties tab.
OK
to return to the print window.
OK
PostScript Settings
Use Adobe Document Structuring Convention
to return to the properties tab.
OK
to return to the print window.
OK
PostScript Settings
Select to send all data using the Adobe Communication
ASCII Data
Protocol.
This allows you to print the data to any printer.
Select
Tagged BCP
binary (8-bit) format.
This option passes data to the printer faster than sending it in
ASCII data mode.
to return to the properties tab.
OK
to return to the print window.
OK
.
to bypass the driver PostScript engine
.
.
to send all data, except special characters, in
tab.
Quality
tab.
Quality
to print each page of a
tab.
Quality
129