Installing From The Cd-Rom - imagistics ipc1-im8130 Operator's Manual

Installing from the CD-ROM

The InstallShield setup program automatically installs the client software
components you select:
GL-PCL6 Printer Driver for the ipc1-im8130 controller
GL-PSL3 Printer Driver for the ipc1-im8130 controller
ipc1 TWAIN Driver
ipc1 Document Monitor
AGFA Font Manager and font collection
Preparation
If ipc1 Document Monitor is present on your workstation, you must close
it. To do so, right-click its icon in the system tray and choose
short-cut menu.
If you have a previous version of the Imagistics software installed on the
workstation, the setup program detects it. Alternatively, you can use the
Add/Remove Programs
delete the old software before beginning the installation process.
Running the Client Setup Program
For this installation, you need the Imagistics ipc1-im8130 Client CD-ROM.
1 Insert the CD-ROM in the workstation CD-ROM drive.
If
automatically and leads you through the setup procedure.
If
following command:
<D>: \setup.exe
Replace D with the letter mapped to your CD-ROM drive.
2 Click
If you are installing a non-US English version, you are asked to select
a language from the Choose Setup Language dialog box.
3 If requested, click the drop-down menu arrow and select a language.
If the installation program detects a previous version of the software,
it opens the Client Setup Maintenance Program.
10
option, accessible from the Windows Control Panel, to
is enabled, the setup program, InstallShield Wizard, begins
AutoRun
is not enabled, select
AutoRun
to launch the setup program.
OK
from the Start menu and enter the
Run
ipc1-im8130 Operator's Guide
from the
Exit