Installing Windows Software - imagistics ipc1-im8130 Operator's Manual

The setup program automatically detects previously installed versions
and opens the Client Setup Maintenance Program.
3 Select
workstation.
4 Follow the InstallShield Wizard prompts as files are removed from the
workstation.
5 Click
6 Restart the computer.
You may have to reboot your system before all components, such as
the program items from the Start menu, are completely removed.

Installing Windows Software

The client software includes the ipc1 Document Monitor print job
monitoring utility, printer drivers for PCL and PostScript (PS), the ipc1
TWAIN Driver, and the AGFA Font Manager.
Considerations and Limitations
The ipc1 Document Monitor utility monitors only ipc1-im8130
devices. It does not support any third party printer drivers. ipc1
Document Monitor cannot locate or interrogate the controller if it has
been set up as a NetWare NDPS printer or NPRINTER.
You must install a printer driver and map it to the controller to access
it using ipc1 Document Monitor.
You can view all jobs in the print queue, including controller-resident
jobs, but can only delete your own jobs.
Prerequisites
Make sure that the client workstation meets the following minimum
requirements:
Windows 98
ipc1-im8130 Operator's Guide
to remove the appropriate components from the
Remove
to exit the setup program.
Finish
Novell Client v3.1 and Client Service Pack 1 are required to run
IPX-based SNMP access and Novell printing.
The Microsoft Client for NetWare can replace the Novell Client
except for NDPS printers.
13