imagistics ipc1-im8130 Operator's Manual page 49

4 For the Windows 98 and Me operating systems, click the
For other Windows operating systems, click the
5 Click
6 Click
7 Click
8 When prompted, enter the controller TCP/IP address, press
if you are setting up an LPR port, change the
\\<controller device name>\dssc.
If you are setting up a Raw port, you do not need to change the port
name.
ipc1-im8130 Operator's Guide
Details Property Tab
.
Add Port...
Add Port Dialog Box
.
New Port
and follow the instructions in the wizard.
Next
Details
tab.
Ports
TAB
to
Port Name
tab.
and,
33