imagistics ipc1-im8130 Operator's Manual page 133

The finishing option icon shows where the staple are placed.
Note: These options are disabled if the staple finisher unit is not
installed on the copier.
Hole-punching Documents
1 Click the
2 From the
want:
The finishing option icon shows where the holes are punched.
Note: These options are disabled if the hole punch finisher unit is not
installed on the copier.
Finishing the Print Job from the Macintosh
The list of stapling options displays all possible stapling positions. Some
of these may not be valid for all paper sizes and feed directions. You may
have to experiment to determine which stapling option works best for
your document.
ipc1-im8130 Operator's Guide
Upper Left: The document is stapled in the upper left corner
Upper Right: The document is stapled in the upper right corner
Left (Double): The document is stapled along the left side using
two staples
Top (Double): The document is stapled along the top edge using
two staples
tab.
Setup
drop-down box, select the hole punch position you
Hole
Off: No holes are punched in the document
Left: Holes are punched along the left edge of the document
Top: Holes are punched along the top edge of the document
117