Installing Macintosh Ppd Files - imagistics ipc1-im8130 Operator's Manual

If the system administrator has uploaded drivers to the controller,
you can install the drivers on your workstation using the
Software
Utility
These procedures are described in detail below .
Enabling LPR/LPD Printing
To set up a client workstation for LPR printing:
1 Install the Microsoft TCP/IP Printing Services software.
2 Add an LPR Port and map it to the controller using the Microsoft Add
Printer wizard.
This procedure is described in detail below .
Enabling IPP Printing
IPP printing enables printing to the controller over the Internet. To
establish IPP printing services:
1 Install the printer and assign it to an IPP port.
2 Configure the IPP port properties by opening the Printers folder and
right-clicking the
For additional information, see

Installing Macintosh PPD Files

Considerations and Limitations
The Imagistics Macintosh PPD (PostScript Printer Description) file
contains information about controller-specific features and works in
conjunction with the standard Macintosh LaserWriter printer driver
(version 8.6.5 or higher for Mac OS 9.2).
If the Macintosh PPD sit file is used (Mac OS 9), it is compressed in
the StuffIt format. It automatically decompresses when it is copied to
the
StuffIt program is installed on the workstation. The Mac OSX PPD is
not compressed and can be copied directly into
Library\Printers\PPDs\Contents\Resources\en.lproj
The controller supports both LPR and AppleTalk printing from
Macintosh systems.
ipc1-im8130 Operator's Guide
link in Printer Utility. See
on page 25.
IPP printer
System Folder: Extensions: Printer Descriptions
Install Drivers from Printer
icon.
Configuring an IPP Port
folder, providing the
.
Install
on page 36.
Macintosh HD\
17