Printer Does Not Power On; Printer Resets Or Powers Off Frequently - Xerox AltaLink C80 Series User Manual

Troubleshooting

Printer Does Not Power On

Probable Causes
The power switch is not switched on.
The power cord is not plugged into the outlet
correctly.
Something is wrong with the outlet
connected to the printer.
The printer is connected to an outlet with a
voltage or frequency that does not match the
printer specifications.
CAUTION:
Plug the three-wire cord with grounding prong directly into a grounded AC outlet.
Do not use a power strip. If necessary, contact a licensed electrician to install a properly
grounded outlet.

Printer Resets or Powers Off Frequently

Probable Causes
The power cord is not plugged into the outlet
correctly.
A system error occurred.
The printer is connected to an uninterruptible
power supply (UPS), extension cord, or power
strip.
A network configuration problem exists.
The printer is connected to an outlet with a
voltage or frequency that does not match the
printer specifications.
244 Xerox AltaLink
® ®
User Guide
Solutions
• Open the front door and check that the main power
• At the printer control panel, press the Power/Wake
Power off the printer, then plug the power cord into the outlet
securely. Use the bracket provided with the printer to secure
the power cord in place.
• Plug another electrical appliance into the outlet and check
• Try a different outlet.
Use a power source with the specifications listed in the
Electrical Specifications
Solutions
Power off the printer. Confirm that the power cord is plugged
in correctly to the printer and the outlet, then power on the
printer.
Power off the printer, then power on again. If the error
persists, contact your Xerox representative.
Only use an extension cord designed to handle the electrical
current capacity of the printer. For details, refer to
Specifications
Unplug the network cable. If the problem is not resolved,
contact your system administrator to reconfigure your
network installation.
Use a power source with the specifications listed in
Specifications
C80XX Series Multifunction Printer
switch is in the On position.
button. For details, refer to
Printer on page 38.
if it operates properly.
on page 332.
on page 332.
on page 332.
Powering On and Off the
Electrical
Electrical