Moving The Printer - Xerox AltaLink C80 Series User Manual

Maintenance

Moving the Printer

• Always power off the printer and wait for the printer to shut down. To power off the printer, verify
that there are no jobs in the queue, then press the secondary power switch. Wait 10 seconds after
the touch screen goes dark, then power off the main power switch. For details, refer to
Printer On and Off
• Disconnect the power cord from the back of the printer.
• Keep the printer level to avoid spilling toner.
Note: When moving the printer over a long distance, remove the drum cartridges and toner
cartridges to prevent toner from spilling. Pack the printer inside a box.
CAUTION:
Failure to repackage the printer properly for shipment can result in damage not
covered by the Xerox
The Xerox ® Warranty, Service Agreement, or Total Satisfaction Guarantee do not cover
damage to the printer caused by improper moving. The Xerox
is available in the United States and Canada. Coverage could vary outside these areas.
Please contact your Xerox representative for details.
240 Xerox AltaLink
® ®
User Guide
on page 38.
Warranty, Service Agreement, or Total Satisfaction Guarantee.
®
C80XX Series Multifunction Printer
Powering the
® Total Satisfaction Guarantee