Xerox AltaLink C80 Series User Manual page 178

Paper and Media
3. Remove any paper that is a different size or type.
4. To move out the length and width guides:
a. Pinch the guide lever on each guide.
b. Slide the guides outward until they stop.
c. Release the levers.
5. Flex the sheets back and forth and fan them, then align the edges of the stack on a level surface.
This procedure separates any sheets that are stuck together and reduces the possibility of jams.
Note: To avoid jams and misfeeds, do not remove paper from its packaging until you are ready to
use it.
6. Load paper in the tray. Position the paper against the left side of the tray.
− For long-edge feed, insert letterhead and pre-printed paper face down with the top edge
toward the front. Load hole-punched paper with the holes to the left.
178 Xerox AltaLink
® ®
User Guide
C80XX Series Multifunction Printer