Erasing The Edges Of Copies; Specifying The Size Of The Original - Xerox AltaLink C80 Series User Manual

Xerox Apps
®
To adjust the Saturation:
At the printer control panel, press the Home button.
1.
Touch Copy.
2.
Touch Saturation.
3.
4. To adjust the saturation, move the slider.
Touch OK.
5.

Erasing the Edges of Copies

You can erase content from the edges of your copies using the Edge Erase feature. You can specify the
amount to erase on the right, left, top, and bottom edges.
To erase the edges of copies:
At the printer control panel, press the Home button.
1.
Touch Copy.
2.
3. Touch Edge Erase.
4. Select one of the following options.
All Edges: This option erases all four edges by the same amount. To adjust the amount to
−
erase, move the slider.
Individual Edges: This option allows you to specify different amounts to erase from the edges.
−
Touch the required Top, Bottom, Left or Right field. To enter the amount to erase, use the
numeric keypad, or touch the arrows.
5. To mirror the same erase amount applied to Side 1 on Side 2, touch the Mirror Side 1 check box.
6. To select a pre-defined amount of erase, use the Presets option.
7. Touch OK.

Specifying the Size of the Original

Use the Original Size feature to set a standard or custom size for scanning, or for the printer to
determine the original size document automatically. You can use this feature to enable mixed-size
original document scanning.
To specify the original size:
1. At the printer control panel, press the Home button.
2. Touch Copy.
3. Touch Original Size.
84 Xerox AltaLink
® ®
User Guide
C80XX Series Multifunction Printer