Optimizing Printer Performance; Connecting To A Telephone Line - Xerox AltaLink C80 Series User Manual

Getting Started

Connecting to a Telephone Line

WARNING:
To reduce the risk of fire, use only No. 26 American Wire Gauge (AWG) or larger
telecommunication line cord.
1. Ensure that the printer is powered off.
2. Connect a standard RJ11 cable, No. 26 American Wire Gauge (AWG) or larger, to the Line port on
the back of the printer.
3. Connect the other end of the RJ11 cable to an operating telephone line.
4. Power on the printer.
5. Enable and configure the Fax functions.

Optimizing Printer Performance

Several factors influence printer performance, including temperature, humidity, air pressure, and the
chemical characteristics of the paper and coatings. The printer must form an electrostatic image on the
paper, which depends on the ability of the air to hold and transfer electrical charges. The paper and
coatings must hold an electrical charge in the areas where the toner must adhere.
To optimize the performance of your printer:
1. At the printer control panel, press the Home button.
Touch Device.
2.
3. Touch Tools.
Touch Troubleshooting > Calibration > Print Calibration > Next.
4.
5. Follow the onscreen instructions to run the Print Calibration procedure.
56 Xerox AltaLink
® ®
User Guide
C80XX Series Multifunction Printer