Clearing Jams At Tray 5 (Bypass Tray) - Xerox AltaLink C80 Series User Manual

Troubleshooting

Clearing Jams at Tray 5 (Bypass Tray)

1. Remove the jammed paper from the tray. Make sure that the paper feed entrance where the tray
connects to the printer is clear.
2. If the paper is torn, check inside the printer for torn pieces of paper.
3. Fan the paper that you removed and make sure that all four corners are aligned.
4. Insert the paper into tray 5 with the printing side face down. The leading edge of the paper should
lightly touch the paper feed entrance.
5. At the control panel, select the correct paper size, type, and color:
− To select a new paper size, touch Size.
− To select a new paper type, touch Type.
To select a new paper color, touch Color.
−
6. To confirm the settings, touch Confirm.
256 Xerox AltaLink
® ®
User Guide
C80XX Series Multifunction Printer