Connecting To A Computer Using Usb - Xerox AltaLink C80 Series User Manual

Getting Started
Printing using Wi-Fi Direct
1. Open the document for printing.
2. Select the Print button at the top right of the screen.
3. If there is more than one printer in the area with Wi-Fi Direct enabled, select the printer required.
4. Select the print settings required for the job.
5. Submit the job for printing.
A pop-up message appears on the mobile device.
Select Connect.
6.
7. When the connection is made, a pop-up message appears on the printer.
8. Touch OK on the printer touch screen.
The job prints at the printer.

Connecting to a Computer Using USB

Ensure that you have one of the following operating systems installed on your computer.
• Windows 7, Windows 8.1, Windows Server 2008, Windows 10, Windows Server 2008 R2, and
Windows Server 2012.
• Macintosh OS X version 10.9 and later.
• UNIX and Linux: Your printer supports connection to various UNIX platforms through the network
interface.
To connect the printer to the computer using a USB cable:
Connect the B end of a standard A/B USB 2.0 or USB 3.0 cable to the USB Port on the back of the
1.
printer.
2. Connect the A end of the USB cable to the USB port on the computer.
3. If the Windows Found New Hardware Wizard appears, cancel it.
4. Install the print driver.
For more information, refer to
50 Xerox AltaLink
® ®
User Guide
Installing the Print Driver Software
C80XX Series Multifunction Printer
on page 58.