Loading Paper
This section includes:
•
Loading Paper in Trays 1–4 ....................................................................................................................................... 177
•
Adjusting the Paper Guides in the 520-Sheet Adjustable Trays .................................................................. 180
•
Loading Paper in Trays 3 and 4 of the Tandem Tray ...................................................................................... 181
•
Loading Paper in Tray 5 .............................................................................................................................................. 183
•
Loading Paper in Tray 6 .............................................................................................................................................. 185
Loading Paper in Trays 1–4
The system administrator can set Trays 1–4 to Fully Adjustable or Dedicated mode. Each time a tray is
opened and closed, the paper settings appear on the control panel:
•
The Fully Adjustable mode allows you to confirm or change the media settings. The tray guides
automatically detect the size of paper loaded.
•
The Dedicated mode displays the media settings for the tray. A warning message appears on the
control panel when the wrong media is loaded, or the tray guides are set incorrectly.
Note:
Only the system administrator can change the media settings for a Dedicated tray.
A warning message appears on the control panel when the paper in the tray is in short supply, or when a
tray is empty.
To load Trays 3 and 4 of the Tandem Tray Module, refer to
Tandem Tray
on page 181.
1.
Pull out the tray until it stops.
2.
Ensure that the paper-guide locks are set in the correct position for the standard or custom size
paper that you are loading. For details, refer to
Adjustable Trays
on page 180.
Loading Paper in Trays 3 and 4 of the
Adjusting the Paper Guides in the 520-Sheet
Xerox
AltaLink
C80XX Series Multifunction Printer
®
®
Paper and Media
177
User Guide