Xerox AltaLink C80 Series User Manual page 192

Paper and Media
Loading Labels in Trays 1–4
1. Pull out the tray until it stops.
2. Remove any paper that is a different size or type.
3. Ensure that the guide locks are set in the correct position for the size labels you are loading.
For details, refer to
Note: Trays 1–4 can print labels 106–169 g/m².
4. Load labels in the tray.
− For long-edge feed, load labels face up, with the top edge toward the front of the tray.
− For short-edge feed, load labels face up, with the top edge toward the right of the tray.
5. Close the tray.
6. At the control panel, select the correct paper size, type, and color:
− Ensure that the paper type is set to Labels. To select a new paper type, touch Type.
To select a new paper size, touch Size.
−
− To select a new paper color, touch Color.
To confirm the paper settings, touch Confirm.
7.
192 Xerox AltaLink
® ®
User Guide
Adjusting the Paper Guides in the 520-Sheet Adjustable Trays
C80XX Series Multifunction Printer
on page 180.