Transparencies - Xerox AltaLink C80 Series User Manual

Paper and Media

Transparencies

Transparencies can be printed from trays 1–5. For best results, use only recommended Xerox
transparencies.
CAUTION:
The Xerox Warranty, Service Agreement, or Xerox Total Satisfaction Guarantee
does not cover damage caused by using unsupported paper or specialty media. The Xerox
Total Satisfaction Guarantee is available in the United States and Canada. Coverage could
vary outside these areas. Please contact your local representative for details.
Guidelines for Printing on Transparencies
• Before you load transparencies in the tray, remove all paper.
• Handle transparencies by the edges using both hands. Fingerprints or creases can cause poor print
quality.
• Do not load more than 20 transparencies. Overloading the tray can cause the printer to jam.
• For clear or non-strip transparencies:
− Load transparencies face up into Trays 1–4.
− Load transparencies face down into Tray 5.
• For striped transparencies:
− Load transparencies into Trays 1–4 with the strip face down on the right trailing edge.
− Load transparencies into Tray 5 with the strip face up on the left trailing edge.
• Do not fan transparencies.
• After you load transparencies, on the control panel, change the paper type to Transparency.
• In the print driver software, for the paper type, select Transparency.
196 Xerox AltaLink
® ®
User Guide
C80XX Series Multifunction Printer
®