Troubleshooting
General Troubleshooting
This section contains procedures to help you locate and resolve problems. Resolve some
problems by simply restarting the printer.
Printer Does Not Power On
Probable Causes
The power switch is not turned on.
The power cord is not plugged into the outlet
correctly.
The printer requires a full reset.
Something is wrong with the outlet connected
to the printer.
The printer is connected to an outlet with a
voltage or frequency that does not match the
printer specifications.
Caution
Plug the three-wire cord with grounding prong directly into a grounded AC outlet.
Xerox
®
VersaLink
®
C505 Multifunction Printer
User Guide
Solutions
At the printer control panel, press the
Power/Wake button. For details, refer to
Options.
Power off the printer, then plug the power cord
securely into the outlet.
Power off the printer, then unplug the power
cord and wait 30 seconds. Plug the power cord
into the outlet securely, then press the
Power/Wake button.
Plug another electrical appliance into the outlet,
then check if it operates properly.
Try a different outlet.
Use a power source with the specifications lis-
ted in the
Electrical
Specifications.
8
Power
8-1