Selecting Finishing Options For Windows - Xerox AltaLink C80 Series User Manual

Selecting Finishing Options for Windows

If your printer has a finisher installed, you can select finishing options in the Properties window of the
print driver. Finishing options allow you to select how your document is delivered. For example, you can
select hole-punching, stapling, folding, or printing in a booklet format.
Note: Not all options listed are supported on all printers. Some options apply only to a specific
printer model, configuration, operating system, or print driver type.
To select finishing options in the PostScript and PCL print drivers:
1. In the print driver, click the Printing Options tab.
2. To select a finishing option, to the right of the Finishing list, click the arrow.
Note: The print driver displays stapling positions for paper fed on the long edge. If paper feeds on
the short edge instead of the long edge, the finisher can insert the staple in the wrong location.
3. To select the output tray, click the arrow to the right of the Output Destination field, then select an
option:
Automatic: This option determines the output destination based on the number of sets and
−
the stapling option selected. The printer sends multiple sets or stapled sets to the finisher
output tray.
− Center Tray: This option selects the output tray in the middle of the Offset Catch Tray, the
Office Finisher, or the Business Ready Finisher.
− Center Bottom Tray: This option selects the output tray on the bottom of the Offset Catch
Tray.
− Finisher Tray: This option selects the output tray on the Integrated Office Finisher.
Left Tray: This option selects the output tray on the left side of the printer.
−
Right Tray: This option selects the output tray on top of the Office Finisher.
−
− Right Top Tray: This option to select the output tray on top of the Business Ready Finisher.
Right Middle Tray: This option selects the output tray in the middle of the Business Ready
−
Finisher.
Right Bottom Tray: This option selects the output tray on the bottom of the Business Ready
−
Booklet Maker Finisher.
To send the job to the printer, click OK, then click Print.
4.
Xerox AltaLink C80XX Series Multifunction Printer
® ®
Printing
139
User Guide