Selecting Printing Options For An Individual Job In Windows; Saving A Set Of Commonly Used Printing Options In Windows; Selecting Finishing Options For Windows - Xerox WorkCentre 7120 User Manual

Selecting Printing Options for an Individual Job in Windows

To use specific printing options for a single job, change the printing properties before sending the job
to the printer. These settings override default printing options for the current job only.
With the document open in your application, click File, then click Print.
1.
Select the printer. To open the Properties window, click Properties. Click the tabs in the Properties
2.
window, then click the desired settings.
3. Click OK to save and close the Properties window.
4. Print the job.

Saving a Set of Commonly Used Printing Options in Windows

You can define and save a set of printing options, so that you can quickly apply them to future print jobs.
To save a set of printing options:
1. With the document open in your application, click File, then click Print.
2. Select the printer, then click Properties. Click the tabs in the Properties window, then click the
desired settings.
3. Click Saved Settings at the bottom of the Properties window, then click Save As.
4. Type a name for the set of printing options, then click OK.
The set of options is saved and will appear in the list. To print using these options, select the name
from the list.

Selecting Finishing Options for Windows

If your printer has the optional Integrated Office Finisher or the optional Office Finisher LX installed,
finishing options are selected in the printer driver.
To select finishing features in the printer driver:
1. Click the Paper/Output tab.
2. Click the arrow to the right of the Finishing section, then click the desired finishing options.
WorkCentre 7120 Multifunction Printer
Printing
65
User Guide