Keypad - GE 469 Instruction Manual

4.1.5

Keypad

4–4
Description
The 469 display messages are organized into main menus, pages, and sub-pages. There
are three main menus labeled settings, Actual Values, and Target Messages.
Pressing the key followed by the
MENU
menu headers, which appear in sequence as follows:
Pressing the key or the

MESSAGE
the corresponding menu page. Use the
through the page headers.
When the display shows
SETTINGS
display the page headers of programmable parameters (referred to as settings in the
manual). When the display shows
key displays the page headers of measured parameters (referred to as actual
ENTER
values in the manual). When the display shows
key or the

MESSAGE ENTER
conditions.
Each page is broken down further into logical sub-pages. The
keys are used to navigate through the sub-pages. A summary of the settings

MESSAGE
and actual values can be found in the chapters 5 and 6, respectively.
The key is dual purpose. It is used to enter the sub-pages and to store altered
ENTER
settings values into memory to complete the change. The
used to enter sub-pages but not to store altered settings.
The key is also dual purpose. It is used to exit the sub-pages and to cancel a
ESCAPE
settings change. The
MESSAGE
settings changes.
The keys are used to scroll through the possible choices of an enumerated settings.
VALUE
They also decrement and increment numerical settings. Numerical settings may also be
entered through the numeric keypad.
Pressing the key displays context-sensitive information about settings such as the
HELP
range of values and the method of changing the settings. Help messages will
automatically scroll through all messages currently appropriate.
The key resets any latched conditions that are not presently active. This includes
RESET
resetting latched output relays, latched Trip LEDs, breaker operation failure, and trip coil
failure.
key scrolls through the three main

MESSAGE
1. SETPOINTS
Press [] for more
2. ACTUAL VALUES
Press [] for more
3. TARGET MESSAGES
Press [] for more
key from these main menu pages will display
ENTER
and

MESSAGE
, pressing the
MESSAGE
, pressing the
ACTUAL VALUES
TARGET MESSAGES
key displays the page headers of event messages or alarm
key can also be used to exit sub-pages and to cancel

469 MOTOR MANAGEMENT RELAY – INSTRUCTION MANUAL
CHAPTER 4: INTERFACES
keys to scroll

MESSAGE
key or the key will

ENTER
key or the

MESSAGE
, pressing the
and

MESSAGE
key can also be

MESSAGE