GE 469 Instruction Manual page 161

CHAPTER 5: SETTINGS
469 MOTOR MANAGEMENT RELAY – INSTRUCTION MANUAL
MESSAGE
These commands clear various informative and historical data when the 469 is first
applied on a new installation.
• RESET MOTOR INFORMATION: Counters for number of motor starts and emergency
restarts can be viewed in actual values. The 469 also learns various motor
characteristics through motor operation. These learned parameters include
acceleration time, starting current, and starting thermal capacity. Total motor running
hours may also be viewed in actual values. On a new installation or if new equipment
is installed, all this information can be reset with this settings.
• RESET STARTER INFORMATION: The total number of starter operations can be viewed
in actual values. Use this settings to clear this counter on a new installation or if
maintenance work is done on the breaker or contactor.
RESET STARTER
INFORMATION: No
Range: No, Yes
5–17