CHAPTER 6: ACTUAL VALUES
469 MOTOR MANAGEMENT RELAY – INSTRUCTION MANUAL
PASSCODE
SETTINGS ACCESS
anytime that settings access is permitted and the access jumper is removed.
•
THIS FEATURE NOT PROGRAMMED: If an attempt is made to enter an actual value
message subgroup, when the settings are not configured for that feature, this
message will appear.
•
TIME ENTRY WAS NOT COMPLETE: Since the
MM/SS.S), if
is pressed before the complete value entered, this message
ENTER
appears and the new value is not stored. Another attempt will have to be made with
the complete information.
•
TIME ENTRY WAS OUT OF RANGE: If and invalid entry is made for the time (e.g. 35
entered for hour), this message will appear.
•
TOP OF LIST: This message will indicate when the top of subgroup has been reached.
•
TOP OF PAGE: This message will indicate when the top of a page has been reached.
settings value is
. This message also appears
Restricted
settings has a special format (HH/
TIME
6–41