GE 469 Instruction Manual page 263

CHAPTER 6: ACTUAL VALUES
469 MOTOR MANAGEMENT RELAY – INSTRUCTION MANUAL
POWER FACTOR
MESSAGE
ALARM
REACTIVE POWER
MESSAGE
ALARM: +2000 kvar
UNDERPOWER
MESSAGE
ALARM: 200 kW
TRIP COUNTER
MESSAGE
ALARM: 25 Trips
STARTER FAILURE:
MESSAGE
Trip Coil Super
CURRENT DEMAND
MESSAGE
ALARM: 1053 A
kW DEMAND
MESSAGE
ALARM: 505 kW
kvar DEMAND
MESSAGE
ALARM: –2000 kvar
kVA DEMAND
MESSAGE
ALARM: 2062 kVA
ANALOG I/P 1
MESSAGE
ALARM: 201 Units
EMERGENCY RESTART:
MESSAGE
Trip Still Present
ALARM, 469 NOT
MESSAGE
INSERTED PROPERLY
469 NOT IN SERVICE
MESSAGE
Not Programmed
RTD #1
MESSAGE
HI ALARM:
ANALOG 1-2
MESSAGE
ALARM:
ANALOG 3-4
MESSAGE
ALARM:
OVERTORQUE
MESSAGE
ALARM:
*LOSS OF COMMS ALARM
MESSAGE
STATUS: Latched
*Only shown if " LOSS OF COMMS: FUNCTION " selection is not 'Off'
Any active alarms may be viewed here.
The various alarm and alarm status actual values reflect the Alarm Name as programmed
in the first line of the message. The status is "Active" if the condition that caused the alarm
is still present.
Range: 0.00 to 0.99 Lead or Lag, 0.00,
PF: 0.00
Range: –50000 to +50000 kvar
Range: –50000 to +50000 kW
Range: 1 to 10000 Trips
Range: Trip Coil Super, Welded
Range: 1 to 10000 A
Range: –50000 to +50000 kW
Range: –50000 to +50000 kvar
Range: 0 to 50000 kVA
Range: –50000 to +50000
Range: Trip Still Present, Block Still
Range: N/A
Range: Not Programmed, Output
Range: 1 to 250°C
135°C
Range: 0 to 999 (% Diff) or 0 to 99999
50%
Range: 0 to 999 (% Diff) or 0 to 99999
50%
Range: 0.00 to 999999.9 Nm
0.00
Range: OFF, Not Active, Timing Out,
1.00
Contactor, Breaker Failure
Present, No Trips & No Blocks
Relays Forced, Analog Output
Forced, Test Switch Shorted
(Abs Diff)
(Abs Diff)
Active, Latched
6–7