GE 469 Instruction Manual page 26

1–16
 Press the decimal [.] key to enter the text editing mode.
The first character will appear underlined as follows:.
SWITCH NAME:
General Sw. A
 Press the keys until the character "S" is displayed in the first
VALUE
position.
 Press the decimal [.] key to store the character and advance the
cursor to the next position.
 Change the second character to a "t" in the same manner.
 Continue entering characters in this way until all characters of the
text "Stn. Monitor" are entered.
Note that a space is selected like a character. If a character is
entered incorrectly, press the decimal [.] key repeatedly until the
cursor returns to the position of the error. Re-enter the character as
required.
 Once complete, press the
view the result. Once a character is entered, by pressing the
key, it is automatically saved in flash memory, as a new settings.
SWITCH NAME:
Stn. Monitor
469 MOTOR MANAGEMENT RELAY – INSTRUCTION MANUAL
CHAPTER 1: GETTING STARTED
key to remove the solid cursor and
ENTER
ENTER