D Emand M Etering - GE 469 Instruction Manual

CHAPTER 6: ACTUAL VALUES
6.3.6 Demand Metering
 DEMAND
METERING
6.3.7 Analog Inputs
 ANALOG
INPUTS
469 MOTOR MANAGEMENT RELAY – INSTRUCTION MANUAL

PATH: ACTUAL VALUES
[] CURRENT
DEMAND: 0 Amps
REAL POWER
MESSAGE
DEMAND: 0 kW
REACTIVE POWER
MESSAGE
DEMAND: 0 kvar
APPARENT POWER
MESSAGE
DEMAND: 0 kVA
PEAK CURRENT
MESSAGE
DEMAND: 0 Amps
PEAK REAL POWER
MESSAGE
DEMAND: 0 kW
PEAK REACTIVE POWER
MESSAGE
DEMAND: 0 kvar
PEAK APPARENT POWER
MESSAGE
DEMAND: 0 kVA
The values for current and power demand are shown. The power demand values are not
shown if the is programmed as "None". Peak Demand information is cleared with
VT RATIO
the

S1 469 SETUP CLEAR DATA
shown only for positive real and positive reactive power.

PATH: ACTUAL VALUES
[]
MESSAGE
MESSAGE
MESSAGE
MESSAGE
MESSAGE
MESSAGE
MESSAGE

A2 METERING DATA DEMAND METERING

CLEAR PEAK DEMAND DATA

A2 METERING DATA ANALOG INPUTS
ANALOG I/P 1
0 Units
ANALOG I/P 2
0 Units
ANALOG I/P 3
0 Units
ANALOG I/P 4
0 Units
ANALOG 1-2
0 Percent
ANALOG 1-2
0 Units
ANALOG 3-4
0 Percent
ANALOG 3-4
0 Units
Range: 0 to 100000 A
Range: 0 to 99999 kW
Range: 0 to 99999 kvar
Range: 0 to 65535 kVA
Range: 0 to 100000 A
Range: 0 to 99999 kW
Range: 0 to 99999 kvar
Range: 0 to 65535 kVA
settings. Demand is
Range: –50000 to 50000. Seen only if
Analog Input is programmed.
Range: –50000 to 50000. Seen only if
Analog Input is programmed.
Range: –50000 to 50000. Seen only if
Analog Input is programmed.
Range: –50000 to 50000. Seen only if
Analog Input is programmed.
Range: –5100 to 4900%. Seen only if
Analog In Diff 1-2 set to %Diff
Range: –100000 to 100000. Seen only
if Analog In Diff 1-2 is Abs Diff
Range: –5100 to 4900%. Seen only if
Analog In Diff 3-4 set to %Diff
Range: –100000 to 100000. Seen only
if Analog In Diff 3-4 is Abs Diff
6–15