GE 469 Instruction Manual page 14

1–4
c. Learned and last starting capacity.
d. Average motor load.
4. Maintenance data. This is useful statistical information that may be used for
preventive maintenance. It includes:
a. Trip counters
b. General counter such as number of motor starts, number of emergency restarts,
number of starter operations, digital counter for other purposes not listed above.
c. Timers such as motor running hours, time between starts timer, and five start
timers used to calculate the average start time of the motor.
5. RTD Learned Data, which includes the maximum temperature measured by each of
the 12 RTDs.
6. Event recorder downloading tool.
7. Product information including model number, firmware version, additional product
information, and calibration dates.
8. Oscillography downloading tool.
Alarm, trip conditions, diagnostics, and system flash messages are grouped under Target
Messages.
 Press the
be displayed in the following sequence:
To access settings,
 Press the
Settings menu.
 Press the
first Settings page.
The Settings pages are numbered, have an 'S' prefix for easy
identification and have a name which provides a general idea of the
settings available in that page.
Pressing the
all the available Settings page headers. Settings page headers look
as follows:
key to access the header of each menu, which will
MENU
1. SETPOINTS
Press [] for more
2. ACTUAL VALUES
Press [] for more
3. TARGET MESSAGES
Press [] for more
key until the display shows the header of the
MENU
 or key to display the header for the
MESSAGE ENTER
 and
MESSAGE MESSAGE

SETPOINTS
S1 469 SETUP
469 MOTOR MANAGEMENT RELAY – INSTRUCTION MANUAL
CHAPTER 1: GETTING STARTED
 keys will scroll through
[]