Bios Security Setup Screen; Figure 4-5. Bios Security Setup Screen - ADLINK Technology CoreModule 430 Reference Manual

Chapter 4

BIOS Security Setup Screen

Main Advanced
Security Settings
Supervisor Password : Not installed
User Password
Change Supervisor Password
Change User Password
Boot Sector Virus Protection
v02.xx (C) Copyright 1985-20xx, American Megatrends, Inc.
•
Supervisor Password – [Not Installed]
•
User Password – [Not Installed]
•
Change Supervisor Password
a. Select Change Supervisor Password from the Security Setup menu.
b. Press <Enter> to access the pop-up entry field, Enter New Password.
c. Type the password and press <Enter> again.
The screen will not display the password as you type.
d. Re-type the password when prompted by the pop-up entry field and press <Enter> again.
If the password is not confirmed when you re-type it, an error message will appear. The password is
stored in NVRAM if you have successfully entered the password.
•
Change User Password
a. Select Change User Password from the Security Setup menu.
b. Press <Enter> to access the pop-up entry field, Enter New Password.
c. Type the password and press <Enter> again.
The screen will not display the password as you type.
d. Re-type the password when prompted by the pop-up entry field and press <Enter> again.
If the password is not confirmed when you re-type it, an error message will appear. The password is
stored in NVRAM if you have successfully entered the password.
•
Boot Sector Virus Protection – [Disabled; Enabled]
CoreModule 430
BIOS Setup Utility
PCIPnP Boot
: Not installed
[Disabled]

Figure 4-5. BIOS Security Setup Screen

Reference Manual
Security Chipset
Enter
F1
F10
ESC
BIOS Setup
Exit
Select Screen
Select Item
Change
General Help
Save and Exit
Exit
41