Remarks - Ricoh D104 Field Service Manual

• Change SP5169 from "1" to "0".
• Turn the machine off and on. Tell the administrator that you have completed servicing the
machine.
• The Administrator will then set the "Service Mode Lock" to ON.

Remarks

Display on the Control Panel Screen
The maximum number of characters which can show on the control panel screen is limited to 30 characters.
For this reason, some of the SP modes shown on the screen need to be abbreviated. The following are
abbreviations used for the SP modes for which the full description is over 30 characters.
Paper Weight
2
Thin paper: 52-59 g/m
Plain Paper1: 60-74 g/m
Plain Paper2: 75-81 g/m
Middle Thick: 82-105 g/m
Thick Paper 1: 106-169 g/m
Thick Paper 2: 170-210 g/m
Thick Paper 3: 211-256 g/m
Paper Type
N: Normal paper
MTH: Middle thick paper
TH: Thick paper
Color Mode [Color]
[K]: Black in B&W mode
[Y], [M], or [C]: Yellow, Magenta, or Cyan in Full Color mode
[YMC]: Only for Yellow, Magenta, and Cyan
[FC]: Full Color mode
[FC, K], [FC, Y], [FC, M], or [FC, C]: Black, Yellow, Magenta, or Cyan in full color mode
Print Mode
S: Simplex
D: Duplex
(14-16lb. Bond)
2
(16-20lb. Bond)
2
(20lb. Bond)
2
(20-28lb. Bond)
2
(28lb. Bond-90lb. Index)
2
(65lb. Cover-54lb. Bond)
2
(65lb. Cover-54lb. Bond)
Paper Feed Station
P: Paper tray
B: By-pass table
Process Speed
L: Low speed (60 mm/s)
M: Middle speed (120 mm/s)
Service Program Mode
5
315