Ricoh D104 Field Service Manual page 418

5. System Maintenance
5126 [F Size Original Setting]
001 Selects F size original setting.
5127 [APS Mode]
001 This program disables the APS.
5150 [By-Pass Length Setting]
Determines whether the transfer sheet from the by-pass tray is used or not.
5
001
Normally the paper length for sub scanning paper from the by-pass tray is limited to 600
mm, but this can be extended with this SP to 1260 mm.
5162 [App. Switch Method]
001 This program specifies the switch that selects an application program.
[Fax Printing Mode at Optional Counter Off]
5167
Enables or disables the automatic print out without an accounting device. This SP is used
when the receiving fax is accounted by an external accounting device.
Fax Printing Mode at Optional
001
Counter Off
[CE Login]
5169
If you will change the printer bit switches, you must 'log in' to service mode with this SP before
you go into the printer SP mode.
001 -
416
[0 to 2 / 0 / 1 /step]
0: 8 1/2" x 13" (Foolscap)
*ENG
1: 8 1/4" x 13" (Folio)
2: 8" x 13" (F)
*CTL [0: Not disabled/ 1: Disabled]
*CTL [0: OFF/ 1: ON]
*CTL [0: Soft Key Set/ 1: Hard Key Set]
[0 or 1 / 0 / - ]
*CTL 0: Automatic printing
1: No automatic printing
[0 or 1 / 0 / - ]
*CTL 0: Disabled
1: Enabled