Ricoh D104 Field Service Manual page 922

3. Appendix: SP Mode Tables
Day Thresh:NF
Sets the threshold days for the near-full display. The near-full of the IT toner collection bottle
012
is displayed after the toner collection full sensor has detected the actuator in the ITB toner
collection bottle.
013 Total Collected Toner
3
014 Full Detection Date
[New Unit Detection]
3901
Turns new PCU detection on or off.
001 ON/OFF Setting
[Manual New Unit Set]
Turns the new unit detection flag for each PM unit on or off.
3902
The use of these counters is explained in the PM section and in the relevant parts of section
3 (Replacement and Adjustment).
001 Development Unit: Bk
002 Development Unit: C
003 Development Unit: M
004 Development Unit: Y
005 Developer: Bk
006 Developer: C
007 Developer: M
008 Developer: Y
204
*ENG [1 to 30 / 10 / 1 day/step]
Displays the total amount from the near full
detection.
*ENG
[0 to 999999999 / 1 / 1]
Displays the date of the near full detection fot the
*ENG
ITB toner collection bottle.
[0 or 1 / 1 / - ]
*ENG
0: OFF, 1: ON
*ENG
*ENG
[0 or 1 / 0 / - ]
0: OFF, 1: ON
*ENG
*ENG
*ENG
Not used
*ENG
[0 or 1 / 0 / - ]
*ENG
0: OFF, 1: ON
*ENG