3. Appendix: SP Mode Tables
[Special 3: Bias: FC]
2857
Adjusts the current for the paper transfer roller for special paper 3 in full color mode.
Normal: 120mm/sec, Low: 60mm/sec
001 Paper Transfer: Normal: 1st
002 Paper Transfer: Normal: 2nd
003 Paper Transfer: Low: 1st
3
004 Paper Transfer: Low: 2nd
[SP 3: L-Edge Correct] DFU
Special 3 Paper: Leading Edge Correction
Adjusts the correction to the paper transfer roller current at the paper leading edge in each
mode. SP2852 and SP2857 are multiplied by these SP values.
2871
Normal: 120mm/sec, Low: 60mm/sec
• The paper leading edge area can be adjusted with SP2872.
001 Paper Transfer: Normal: 1st
002 Paper Transfer: Normal: 2nd
003 Paper Transfer: Low: 1st
004 Paper Transfer: Low: 2nd
[Special 3: Sw Timing: Lead. Edge] DFU
Adjusts the bias/ voltage switch timing of the paper transfer roller/ discharge plate at the
2872
paper leading edge between the erase margin area and the image area.
Normal: 120mm/sec, Low: 60mm/sec
001 Paper Transfer: Normal: 1st
002 Paper Transfer: Normal: 2nd
003 Paper Transfer: Low: 1st
004 Paper Transfer: Low: 2nd
148
*ENG
[0 to 200 / 25 / 1 – A /step]
*ENG
[0 to 200 / 28 / 1 – A /step]
*ENG
[0 to 200 / 11 / 1 – A /step]
*ENG
[0 to 200 / 14 / 1 – A /step]
*ENG
*ENG
[0 to 400 / 100 / 5% /step]
*ENG
*ENG
*ENG
*ENG
[0 to 30 / 0 / 2 mm/step]
*ENG
*ENG