Ricoh D104 Field Service Manual page 982

3. Appendix: SP Mode Tables
Cause
Illegal Modem Parameter
3
Operation Error, Incorrect
Setting
Operation Error, Incorrect
Setting
Error Caused by Response
from GW URL
264
Code Meaning
-11001 Chat parameter error
-11002 Chat execution error
-11003 Unexpected error
Inquiry, registration attempted without acquiring
-12002
device status.
Attempted registration without execution of an
-12003
inquiry and no previous registration.
Attempted setting with illegal entries for
-12004
certification and ID2.
@Remote communication is prohibited. The
-12005 device has an Embedded RC gate-related
problem.
A confirmation request was made after the
-12006
confirmation had been already completed.
The request number used at registration was
-12007
different from the one used at confirmation.
Update certification failed because mainframe
-12008
was in use.
ID2 mismatch between an individual
-12009
certification and NVRAM
-12010 Certification area is not initialized.
Attempted dial up overseas without the correct
-2385
international prefix for the telephone number.
-2387 Not supported at the Service Center
-2389 Database out of service
-2390 Program out of service
-2391 Two registrations for same device
-2392 Parameter error