Ricoh D104 Field Service Manual page 927

[APS Operation Check]
4301
Displays a code that represents the original size detected by the original sensors. (See "Input
Check Table".)
001 APS Operation Check
[APS Min Size]
4303
Specifies the result of the detection when the outputs from the original sensors are all OFF.
001 APS Min. Size
4305 [8K/16K Detection]
001 This program enables the machine to automatically recognize the 8K/16K size.
4308 [Scan Size Detection]
001 Detect: ON/OFF
4309 [Scan Size Detect Setting] DFU
001 Original Density Thresh
002 Detection Time
003 Lamp ON:Delay Time
[Scan Size Detect Value]
4310
Displays the scanned data for the original width detection.
- -
[0 to 1 / 0 / 1 /step]
*ENG 0: No Original
1: A5-Lengthwise (16K SEF if 4305 is set to 3)
[0 to 3 / 0 / 1 /step]
0: Normal Detection (the machine detects A4/LT
size as A4 or LT, depending on the paper size
setting)
*ENG
1: A4-Sideways LT-Lengthwise
2: LT-Sideways A4-Lengthwise
3: 8K 16K
[0 or 1 / 1 / 1 /step]
*ENG
0: OFF, 1: ON
*ENG [0 to 255 / 32 / 1 digit /step]
*ENG [20 to 100 / 60 / 20 msec /step]
*ENG [0 to 200 / 40 / 20 msec /step]
System SP4xxx
3
209