Ricoh D104 Field Service Manual page 348

5. System Maintenance
009 Number of Failure
010 Error Counter: C
011 Error Counter: M
012 Error Counter: Y
[Skew Origin Set]
Resets the value of the skew adjustment motor for each color.
2220
5
These SPs must be executed when a new laser optics housing unit is installed. For details,
see "Laser Unit" in the "Replacement and Adjustment" section.
001 C:Skew Motor
002 M:Skew Motor
003 Y:Skew Motor
[Ambient Temp/Hum:Display]
2241
Displays the environment temperature and humidity.
001 Temperature
002 Relative Humidity
003 Absolute Humidity
[Transfer Roller CL: Bias]
2326
Transfer Roller Cleaning: Bias Adjustment
Positive:befor and after JOB
001
Adjusts the positive voltage of the paper transfer roller for cleaning the paper transfer roller.
Negative:befor and after
JOB
002
Adjusts the negative current of the paper transfer roller for cleaning the paper transfer roller.
346
*ENG [0 to 999999 / 0 / 1 times/step]
*ENG [0 to 9 / 0 / 1 /step]
0: Not done
*ENG
1: Completed successfully
2: Cannot detect patterns
3: Fewer lines on the pattern than the target
*ENG
4: Out of the adjustment range
5 to 9: Not used
*ENG
*ENG -
*ENG
- [–5 to 45 / - / 0.1deg/step]
- [0 to 100 / - / 0.1 %RH/step]
- [0 to 100 / - / 0.1 g/m
*ENG [0 to 2100 / 250 / 10 V /step]
*ENG [10 to 400 / 100 / 10 %/step]
3
/step]