Ricoh D104 Field Service Manual page 794

3. Appendix: SP Mode Tables
011 Sub:RH Change Thresh
012 Sub:AH Change Thresh
013 Non-use Time
014 Correction Coeff.
2015 [Charge AC Adj: Result]
3
001 Bk
002 C
003 M
004 Y
2016 [ZnSt Application Mode]
The drum lubrication mode interrupts the copy/print job to prevent the drum filming or
cleaning problem after the high coverage image printing if some conditions are met. The
following SPs can be adjusted for the drum lubrication mode.
Temperature Threshold
001
Specifies the threshold temperature for the low temperature mode of the drum lubrication
during the multiple printing job.
Execution Interval: Setting:1
002
Specifies the reference number of the outputs for the high coverage image job in the low
speed mode.
Execution Interval: Setting:2
003
Specifies the reference number of the outputs for the high coverage image printing job in the
low temperature condition.
Execution Interval: Setting:3
004
Specifies the reference number of the outputs for the low coverage image job.
High Coverage Threshold:1
005
Specifies the threshold for the high coverage image to the drum lubrication mode handled
by the setting 1 (SP2-016-002).
76
*ENG [0 to 50 / 5 / 1 %RH/step]
*ENG [0 to 20 / 1 / 0.1 g/m
*ENG [0 to 1440 / 360 / 10 min/step]
*ENG [0 to 2 / 1 / 0.01 kV/mA/step]
*ENG
*ENG
[0 to 9 / 0 / 1 /step]
*ENG
*ENG
*ENG [0 to 50 / 15 / 1 deg/step]
*ENG [0 to 999 / 0 / 1 page/step]
*ENG [0 to 999 / 0 / 1 page/step]
*ENG [0 to 999 / 0 / 1 page/step]
*ENG [0 to 100 / 10 / 0.01%/step]
3
/step]