2. Installation
13. Push the toner bottle, and then turn each one to the right (clockwise).
2
14. Remove the SD card slot cover [A] (
15. Insert the SD Card (Java VM) provided in the accessories into SD slot 2 [B].
16. Reattach the SD card slot cover (
17. Switch the machine on.
18. On the operation panel, remove the bottom blank keytop and replace it with the keytop provided.
19. Attach the decal to the copier.
20. Close the front door.
Paper Trays
1. Pull each paper tray [A] out. Then adjust the side guides and end guide to match the paper size.
• To move the side guides, first pull out the tray fully. Then push down the green lock at the rear
inside the tray.
48
x 1).
x 1).