Gigabit Ethernet - Ricoh D104 Field Service Manual

2. Installation
12. Under "Install to" touch "Machine HDD" and touch "Next".
13. When you see "Ready to Install", check the information on the screen to confirm your previous
selection.
14. Touch "OK". You will see "Installing the extended feature... Please wait.", and then "Completed".
15. Touch "Exit" to go back to the setting screen.
2
16. Touch "Change Allocation".
17. Touch the "Browser" line.
18. Press the hard key that you want to use for the Browser Unit. As a default, this function is assigned to
the "Other Functions" key (the bottom key of the function keys).
19. Touch "OK".
20. Touch "Exit" twice to go back to the copy screen.
21. Turn off the main power switch.
22. Install the key for "Browser Unit" to the place where you want.
23. Remove the SD card of the Brower Unit from SD slot 2.
24. Reinstall the VM card in the SD slot 2.
25. Attach the slot cover [A] (
26. Keep the SD card in the place (
program from the card to HDD. This is because the SD card can be the only proof that the user is
licensed to use the application program. You may need to check the SD card and its data to solve a
problem in the future.

Gigabit Ethernet

• Unplug the main machine power cord before you do the following procedure.
146
x 1).
p.132 "SD Card Appli Move") after you install the application