Ricoh D104 Field Service Manual page 334

5. System Maintenance
Temp.:Normal:Center:Level2
002
Specifies the subtractive temperature level 2 of the fusing temperature control for variable
job images.
003-
[Envir. Correct:Fusing]
006
Low Temp. Correction
003
Specifies the temperature correction in the low temperature condition.
High Temp. Correction
004
Specifies the temperature correction in the high temperature condition.
Offset Temp:Low
5
005
Specifies the temperature correction of the paper feeding taraget in the low temperature
condition.
Offset Temp:High
006
Specifies the temperature correction of the paper feeding taraget in the high temperature
condition.
1113 [Curl Correction]
Execute Pattern
001
Selects the curl correction type.
Humidity:Threshold:M-
humid
002
Specifies the threshold between low and middle humidity.
Humidity:Threshold:H-humid *ENG
003
Specifies the threshold between middle and high humidity.
Permit Temp.:Delta:Press:M-
humid
004
Specifies the threshold temperature for the curl control in middle humidity.
332
*ENG [-25 to 10 / -10 / 1 /step]
*ENG [0 to 15 / 5 / 1 deg/step]
*ENG [0 to 15 / 5 / 1 deg/step]
*ENG [0 to 15 / 6.5 / 0.1 deg/step]
*ENG [0 to 15 / 5 / 0.1 deg/step]
[0 to 2 / 0 / 1 /step]
*ENG
0: Off, 1: On
*ENG [0 to 100 / 65 / 1 %/step]
[0 to 100 / 80 / 1 %/step]
*ENG [0 to 200 / 100 / 1 deg/step]