Ricoh D104 Field Service Manual page 341

Hide thumbs Also See for D104:

Table of Contents

[Color Regist Adjust]

These values are the parameters for the automatic line position adjustment and are adjusted

at the factory. However, you must input a value for SP2101-001 after replacing the laser

optics housing unit. For details, see "Laser Optics Housing Unit" in the "Replacement and

Adjustment" section. The value should be provided with the new laser optics housing unit.

001 Bk: Main Scan: Dot

002 C Main Scan: Dot

003 M Main Scan: Dot

004 Y Main Scan: Dot

013 Bk: Sub Scan: Line

014 C: Sub Scan: Line

015 M: Sub Scan: Line

016 Y: Sub Scan: Line

[Magnification Adjust]

These values are the parameters for the automatic line position adjustment and are adjusted

at the factory. These SPs must be input only when a new laser unit is installed.

001 Main Mag.: Bk:High Spd

003 Main Mag.: Bk:Low Spd

004 Main Mag.: C:High Spd

006 Main Mag.: C:Low Spd

007 Main Mag.: M:High Spd

009 Main Mag.: M:Low Spd

010 Main Mag.: Y:High Spd

012 Main Mag.: Y:Low Spd

[Erase Margin Adjust] (Area, Paper Size)

Adjusts the erase margin by deleting image data at the margins.

[–512 to 511 / 0 / 1 dot/step]

[–16384 to 16383 / 0 / 1 line/step]

[0 to 560 / 280 / 1 /step]

Main SP Tables-2

Chapters

Table of Contents