Ricoh D104 Field Service Manual page 750

3. Appendix: SP Mode Tables
011 Tray:Thick1:1200dpi
012 Tray:M-Thick:1200dpi
013 By-pass:Plain:1200dpi
014 By-pass:Plain:1200dpi
015 By-pass:Thick1:1200dpi
016 By-pass:Thick2:1200dpi
3
017 By-pass:Thick3:1200dpi
018 By-pass:M-Thick:1200dpi
019 Duplex:Plain:1200dpi
020 Duplex:M-Thick:1200dpi
[Side-to-Side Registration]
Adjusts the side-to-side registration by changing the laser main scan start position for each
1002
mode and tray.
Increasing a value: an image is moved to the rear edge of paper.
Decreasing a value: an image is moved to the front edge of paper.
001 By-pass
002 Paper Tray 1
003 Paper Tray 2
004 Paper Tray 3
005 Paper Tray 4
006 Duplex
[Paper Buckle] Paper Buckle Adjustment
(Tray Location, Paper Type), Paper Type: M-Thick: Middle Thick
1003
Adjusts the amount of paper buckle at the registration roller by changing the paper feed
timing.
32
*ENG
*ENG
*ENG
*ENG
*ENG
[–9 to 9 / 0.0 / 0.1 mm/step]
*ENG
*ENG
*ENG
*ENG
*ENG
*ENG
*ENG
*ENG
[–4 to 4 / 0.0 / 0.1 mm/step]
*ENG
*ENG
*ENG