2. Installation
2
Bluetooth
• Unplug the main machine power cord before you do the following procedure.
You can only install one of the following network interfaces at a time: (IEEE 802.11 a/g, g (Wireless LAN),
IEEE1284, Bluetooth).
1. Remove the slot cover [A] (
2. Install the Bluetooth board [A] (Knob-screw x 2) into the slot.
142
SSID
Used to confirm the current SSID setting.
WEP Key
Used to confirm the current WEP key setting.
Used to show the maximum length of the string that can be used
WEP Mode
for the WEP Key entry.
x 2).