Ricoh D104 Field Service Manual page 861

[SP4: L-Edge Correct] DFU
Special 4 Paper: Leading Edge Correction
Adjusts the correction to the paper transfer roller current at the paper leading edge in each
2795
mode. SP2783 and SP2787 are multiplied by these SP values.
• The paper leading edge area can be adjusted with SP2796.
001 Paper Transfer
[SP 4: Switch Timing: L-Edge] DFU
2796
Adjusts the bias/ voltage switch timing of the paper transfer roller/ discharge plate at the
paper leading edge between the erase margin area and the image area.
001 Paper Transfer
[SP4: T-Edge Correct] DFU
Special 1 Paper: Trailing Edge Correction
Adjusts the correction to the paper transfer roller current for the paper trailing edge in each
2797
mode. SP2783 and SP2787 are multiplied by these SP values.
• The paper trailing edge area can be adjusted with SP2798.
001 Paper Transfer
[SP 4: Sw Timing: T-Edge] DFU
2798
Adjusts the bias/voltage switch timing of the paper transfer roller/discharge plate at the
paper trailing edge between the erase margin area and the image area.
001 Paper Transfer
2799 [SP 4: Env. Correct Table] DFU
003 Paper Transfer:BW: 1st
005 Paper Transfer:FC: 1st
*ENG [0 to 400 / 100 / 5%/step]
*ENG [0 to 30 / 0 / 2 mm/step]
*ENG [0 to 400 / 100 / 5%/step]
*ENG [-98 to 0 / 0 / 2 mm/step]
*ENG [1 to 50 / 17 / 1 /step]
*ENG [1 to 50 / 29 / 1 /step]
System SP2xxx
3
143