Acd Voice Mail Delay Announcement - NEC SL2100 Programming Manual

ISSUE 2.0
Level:
SA
Description
Use Program 41-19 : ACD Voice Mail Delay Announcement to assign InMail Master Mailboxes
(Program 47-03) as ACD Delay Announcement Mailboxes.
Input Data
ACD Group Number
Item Item
No.
01 Delay Message Start
Timer
02 Mailbox Number for
1st Announcement
Message
03 1st Delay Message
Sending Count
04 Mailbox Number for
2nd Announcement
Message
05 2nd Delay Message
Sending Count
06 Wait Tone Type at
Message Interval
07 ACD Forced Discon-
nect Time after 2nd
Announcement
08 Delay Message Inter-
val Time
Conditions
None
Feature Cross Reference
None
Programming Manual
Program 41 : ACD Setup

41-19 : ACD Voice Mail Delay Announcement

Input Data
0 ~ 64800 (seconds)
Dial (up to eight digits)
0 ~ 255
0 = No message is
played.
Dial (up to eight digits)
0 ~ 255
0 = No message is
played.
0 = Ring Back Tone
1 = Music On Hold Tone
2 = Background Music
Source
0 ~ 64800 (seconds)
0 ~ 64800 (seconds)
1 ~ 8
Description
Determine the time the system waits be-
fore playing the Delay Message.
Assign the Voice Mail ACD Announcement
Mailbox as the message source for the 1st
Announcement Message.
Determine the 1st Delay Message Sending
Count. This entry must be set to 1 or high-
er for the message to play.
Assign the Voice Mail ACD Announcement
Mailboxes as the message source for the
2nd Announcement Message.
Determine the 2nd Delay Message Send-
ing Count. This entry must be set to 1 or
higher for the message to play.
Determine what the caller hears between
the messages.
Assign the time the system should wait af-
ter the end of the ACD Delay Message be-
fore disconnecting.
Set the time for the interval between the
Delay Messages.
SL2100
Program
41
Default
0
No Setting
0
No Setting
0
0
0
20
2-409