Xerox Phaser 6120 Service Manual page 150

12.
Remove the Laser (PH) Unit Covers (Right) [9], (Left) [10].
a.
Disconnect the blue connector from the switch (S5).
b.
Push the tabs of the Laser (PH) Unit Cover [11] and remove the Laser (PH) Unit
Cover.
Caution:
Use care not to pull the laser unit with an excessive force, so you do not damage
the wiring harnesses.
13.
Remove the screw [8], remove the Power Supply cooling Fan Motor Cover [9], and the
cooling fan housing in order to gain access to the harnesses.
14.
Remove the 3 harnesses from the saddle, and then feed the 3 harnesses that you unplugged
from the controller board underneath the black fan duct.
Phaser® 6120 Color Laser Printer Service Manual
Disassembly/Assembly Procedures
[9]
[11]
[10]
4139fs2036c1
[8]
4139fs2073c1
5-22
[9]