Ipx/Spx - Xerox Phaser 6120 Service Manual

ENABLE HTTP
Function
Use
Setting/procedure
ENABLE AUTO IP
Function
Use
Setting/procedure

IPX/SPX

FRAME TYPE
Function
Use
Setting/procedure
ETHERTALK
NAME
Function
Use
Setting/procedure
NAME 2
Function
Use
Setting/procedure
Phaser® 6120 Color Laser Printer Service Manual
Specifies whether or not HTTP is used.
To specify whether HTTP is used.
ON: the Web page provided in the printer by the built-in HTTP server is
enabled.
OFF: the Web page cannot be used.
The machine must be restarted after the setting has been changed.
The default setting is ON.
"ON", OFF
Selects whether or not the IP address is automatically acquired when DHCP/
BOOTP, PING, and ARP are not functioning or when there is no response.
To automatically acquire an IP address when DHCP/BOOTP, PING, and ARP
are not functioning or when there is no response.
The default setting is YES.
"YES", NO
Sets the Ethernet frame type.
To specify the Ethernet frame type for transmission.
The default setting is Auto.
"Auto", 802.2, 802.3, ETHER II, SNAP
Specifies the first part of the name of the printer on the Macintosh EtherTalk
(AppleTalk) network, so it can be "found."
To set the Printer name displayed on the Macintosh EtherTalk (AppleTalk)
network.
The printer name can contain a maximum of 16 characters.
The default setting is Phaser 6120.
Specifies the second part of the name of the printer on the Macintosh
EtherTalk (AppleTalk) network, so it can be "found."
To set the Printer name displayed on the Macintosh EtherTalk (AppleTalk)
network.
The printer name can contain a maximum of 16 characters.
The default setting is NULL.
3-20