Rack Motor (M2) - Xerox Phaser 6120 Service Manual

3.
Remove four screws [5] and remove the Rack Drive Assy [6] by pulling it straight out of
the printer.
4.
Remove two screws [7], disconnect the connector [8], and remove the Developing
Motor [9].

Rack Motor (M2)

1. Remove the Rack Drive Assy. See the removal procedure Steps 1 to 3 of
Motor (M3) on page 5-30.
2. Remove two screws [1], disconnect the connector [2], and remove the Rack Motor [3].
Phaser® 6120 Color Laser Printer Service Manual
Disassembly/Assembly Procedures
[5]
[6]
[5]
4139fs2046c0
[7]
[9] [8]
4139fs2047c0
[1]
[3]
[2] [1]
4139fs2048c1
5-31
Developing